Infra Red Cure Systmw/Pro Hc Deluxe Kit

Infrared Cure System with PRO HotCoat Gun Deluxe Kit (58130) - This kit gives you everything you need to coat and cure small or larger parts. The following items are included inthis kit: PRO 1100 Gun, 2 lbs. Gloss Black Powder, 20 oz spray bottle of Oxisolv Rust Remover, Metal Wash, a roll of 1/2" and 1" High Temp Masking Tape, 1 lb spool of Stainless Steel Wire, PRE Painting Prep Aer., Set of 3 Gun Cups and Lids, Disposable Moisture Filter, Infrared Light, Light Stand, IR Thermometer, and complete instructions. NOTE: GROUND SHIP ONLY!

Now it's easier than ever to coat and cure larger items that required a large oven. The New Model 6000 IR lamp cures parts about 3 times faster than our smaller (10180) IR lamp. This set includes the 6000 IR lamp complete HotCoat PRO Deluxe Kit (58130) with HotCOat PRO Gun, silicone caps and plugs, 1/2"and 1" rolls high temperature tape, safety wire, 3 extra cups and lids, disposable moisture filter, one 2-lb box of Gloss Black powder, 20-oz bottle of Oxisolv Rust Remover, 7-oz can of Metal Wash, can of PRE Painting Prep Aer. and complete instructions.

HCP 39 X 39 X 40 Oven Stand

This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor), and an electric oven or toaster oven. The Hot Coat system should only be used in a clean, dry, well-ventilated work area! A dedicated electric oven should be used. Complete kit includes application gun, power unit (requires 115V AV 60HZ. grounded outlet),activator switch, disposable moisture filter and 8 oz. of high gloss black. Detailed instruction will assist you with results.

This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor), and an electric oven or toaster oven. The Hot Coat system should only be used in a clean, dry, well-ventilated work area! A dedicated electric oven should be used. This kit inc. corona application gun, power unit (requires 115 VAC 60hz. grounded outlet),activator switch, disposable moisture filter and 8 oz. of High Gloss Black and instructions. Imported.